Archive for January 2024
Share
Share
Share

Fixing Wi-Fi Issues on OCLP 1.3 and Sonoma Hackintosh (MacbookPro 11,5)

Guide:

If you're facing Wi-Fi problems on your OCLP 1.3 and Sonoma Hackintosh setup on a MacBook Pro 11,5 (15" mid 2015), you can try the following steps to resolve these issues:

  1. Check Your Wi-Fi Card: Ensure that you have a compatible Wi-Fi card installed in your MacBook Pro. Some cards work better than others with macOS, and having a compatible one can help improve stability. You may need to replace or upgrade your Wi-Fi card if it's not compatible.

  2. Update Kexts and Drivers: Make sure you have the latest Wi-Fi kexts and drivers installed for your Wi-Fi card. You can find compatible kexts and drivers from the Hackintosh community or relevant forums. Keep them up to date as new versions are released.

  3. BIOS/UEFI Settings: Check your BIOS or UEFI settings for any options related to Wi-Fi or power management. Sometimes, adjusting these settings can resolve connectivity issues. Ensure that your settings are configured for macOS compatibility.

  4. Power Management: Adjust power management settings to prevent the Wi-Fi card from entering low-power states during sleep or idle. Some kexts or utilities can help with this. Research and apply the appropriate solution for your hardware.

  5. Wi-Fi Preferences: Reset your Wi-Fi preferences by deleting the Wi-Fi interface in System Preferences > Network and then re-adding it. Sometimes, a corrupted preference file can cause connectivity problems.

  6. Network Diagnostics: macOS has built-in network diagnostics tools. Use them to troubleshoot and repair network issues. Go to System Preferences > Network > Assist Me and follow the prompts for network diagnostics.

  7. Reconnection Script: You can create a script that attempts to reconnect to Wi-Fi automatically when it's lost. This script can be triggered by a hotkey or scheduled to run at regular intervals. Search for and adapt scripts available in the Hackintosh community.

  8. Monitor Wi-Fi Signal: Use a third-party Wi-Fi monitoring app to check the signal strength and quality. This can help you identify if the issue is related to signal strength or interference.

  9. Consider External Wi-Fi Adapter: If all else fails, consider using an external USB Wi-Fi adapter that is known to work well with macOS. This can provide a reliable alternative to your internal Wi-Fi card.

  10. Stay Informed: Stay connected with the Hackintosh community and forums to receive updates, patches, and solutions specific to your hardware and macOS version.

Remember that compatibility and stability can vary depending on the specific hardware and configuration of your Hackintosh. It may take some trial and error to find the best solution for your MacBook Pro model. Always back up your system before making significant changes or updates.

OCLP 1.3 and Sonoma on MacbookPro 11,5 (15" mid 2015) Wifi problems (works but unable to reconnect after shell closing or black screen)

I've a MacBook Pro mid 2015 (11,5) with OCLP 1.3 and Sonoma 14.2.1.

I had no problem with Ventura, but from the beginning Sonoma had many problem with the wifi:

- sometimes impossible to toggle on/off or you can but the icon in the top bar is not updated

- sometimes is connected but the wifi bars blinks like as is searching for a wifi

- sometimes the same icon seems that I'm connected but in fact...I'm not

But the biggest problem is that if I'm connected to a wifi and I close the shell, or if the mac goes in standy by after some minutes that I don't touch it, when I try to use it again, wifi doesn't work. I can only connect to another wifi if available, or I have to reboot...every time.

At work we have the same wifi ssid for every floor with many AP, and if a change floor or AP, the connection is lost and I have to reboot.

Someone has a solution? It's really a big problem.

Many thanks.

F

submitted by /u/Acrobatic_Avocado819
[link] [comments]
[► Source]
1 comentarios
Share
Share
Share

How to Downgrade macOS on a MacBook Pro (Early 2011)

Guide:

If you're experiencing issues with macOS Ventura on your early 2011 MacBook Pro and want to downgrade to a different macOS version like Monterey, you can follow these steps. Downgrading macOS involves erasing your current macOS installation and then reinstalling the desired older version. Please note that downgrading macOS will result in data loss, so ensure you have a backup of your important files before proceeding.

Step 1: Backup Your Data

Before you start, make sure to back up all your important data using Time Machine or an external drive. This ensures that you can restore your files after the downgrade.

Step 2: Create a macOS Monterey Installer

  1. Download the macOS Monterey installer from the App Store if you haven't already. It should be available in the App Store's "Purchased" section if you've downloaded it in the past.

  2. Once downloaded, the installer will launch automatically. Quit the installer at this point; we will use it later.

Step 3: Erase Your Current macOS Installation

  1. Restart your MacBook Pro.

  2. While it's restarting, hold down the "Command" and "R" keys to boot into macOS Recovery Mode.

  3. In Recovery Mode, open Disk Utility.

  4. Select your Mac's startup disk (usually named "Macintosh HD" or similar) from the list on the left.

  5. Click the "Erase" button in the toolbar.

  6. Choose "Mac OS Extended (Journaled)" as the format and give it a name (e.g., "Macintosh HD").

  7. Click "Erase" to format the drive. This will erase your current macOS installation.

Step 4: Reinstall macOS Monterey

  1. Exit Disk Utility to return to the main Recovery Mode menu.

  2. Select "Reinstall macOS" and follow the on-screen instructions.

  3. When prompted to choose a destination disk, select the newly formatted disk (e.g., "Macintosh HD").

  4. The installer will proceed to install macOS Monterey on your MacBook Pro.

Step 5: Restore Your Data

  1. After macOS Monterey is installed, your MacBook Pro will restart.

  2. Follow the setup process until you reach the Migration Assistant screen. Choose to migrate data from your Time Machine backup or external drive.

  3. Select the backup you created in Step 1.

  4. Follow the on-screen instructions to restore your files and settings.

Step 6: Update Your Software

After successfully downgrading to macOS Monterey, make sure to update to the latest macOS Monterey version via Software Update to ensure you have the latest security and feature updates.

Please note that while macOS Monterey may run more smoothly on your early 2011 MacBook Pro, it might not be officially supported by Apple, so there could be some limitations or compatibility issues. Be sure to check for any specific compatibility information related to your model.

Are there any resources on how to downgrade the macOS?

I am using a macbook 13-ich early 2011 MacBook Pro. I upgraded it from High Sierra to Ventura, but lately, I've been experiencing some serious issues. I've heard that Monterey runs very smoothly on most outdated MacBooks. I'm looking for resources that teach how to successfully downgrade the macOS (or is the process of downgrading the same as upgrading it). I tried to search it on YouTube but I couldn't find anything. Does someone have some knowledge to share? Or at least some manuals that tell everything step by step? Thanks a lot!

submitted by /u/awenixmusic
[link] [comments]
[► Source]
1 comentarios
Share
Share
Share

Fixing Boot Loop Issue in macOS Monterey

Guide:

If your macOS Monterey installation is stuck in a boot loop after swapping monitors, follow these steps to potentially resolve the issue:

Note: Before proceeding, ensure you have a backup of your important data.

  1. Safe Mode Boot:

    • Try booting your Mac into Safe Mode by following these steps:
      • Turn off your Mac.
      • Turn it on and immediately press and hold the "Shift" key.
      • Release the "Shift" key when the Apple logo appears.
    • Safe Mode may help bypass certain driver or hardware conflicts.

  2. Revert Monitor Configuration:

    • If the issue started after swapping monitors, try reverting to the previous monitor configuration. Disconnect the new monitor and reconnect the old one, if possible.

  3. Reset NVRAM/PRAM:

    • Resetting the NVRAM (Non-Volatile Random-Access Memory) or PRAM (Parameter RAM) can sometimes resolve boot-related issues. Follow these steps:
      • Shut down your Mac.
      • Turn it on and immediately press and hold the "Option," "Command," "P," and "R" keys simultaneously.
      • Keep holding the keys for about 20 seconds until you hear the startup chime a second time, then release them.
    • Your Mac will restart. Check if the boot loop issue is resolved.

  4. Reinstall Legacy Boot Patcher:

    • If you believe that the boot loop issue is related to the Legacy Boot Patcher, you can attempt to reinstall it from macOS Recovery mode. Here's how:
      • Restart your Mac and hold down the "Command" and "R" keys until you see the Apple logo.
      • Select "Reinstall macOS" from the Utilities menu.
      • Follow the on-screen instructions to reinstall macOS Monterey. This process should not affect your data but may repair system files.
      • After the reinstallation is complete, you may need to reapply any patches or configurations specific to your system.

  5. Check for Monitor Compatibility:

    • Ensure that the monitors you're using are compatible with macOS Monterey and that you have the appropriate drivers or updates installed, especially if you're using monitors with high resolutions or special features.

  6. Hardware Diagnostics:

    • Run Apple Diagnostics or Apple Hardware Test to check for any hardware issues. To do this, restart your Mac and hold down the "D" key until the diagnostic utility starts.

  7. Consult Online Communities:

    • If the issue persists, seek assistance from online Mac forums and communities. Others may have experienced similar problems and found solutions specific to your hardware and macOS version.

Remember that resolving boot loop issues can be complex and may require troubleshooting specific to your system configuration. Always back up your data regularly to avoid data loss during troubleshooting.

Stuck on boot loop Monterey

I’m. Not sure what happened… I didn’t try to update anything, I just swapped two of my monitors and it restarted into a boot loop. Is there an easy fix for this?

Can I just reinstall the legacy boot patcher from recovery mode?

Any help would be greatly appreciated

submitted by /u/johnlamagna
[link] [comments]
[► Source]
0 comentarios